7 Decking Mistakes You Should Always Avoid

deck owners
5 New Year’s Resolutions for Deck Owners
January 16, 2017
deck contractor
5 Important Questions to Ask Your Deck Contractor
February 7, 2017

7 Decking Mistakes You Should Always Avoid

building a deck

7 Decking Mistakes You Should Always Avoid

If you have made the decision to construct a new deck, the last thing you want is for something to go wrong or to have an issue after the deck has been built. This short article will inform you of the seven decking mistakes you should always avoid.

  1. Use the correct size of wood planks

One of the largest decking mistakes to avoid is using the incorrect size of deck lumber for your new deck area. Make sure you get specific dimensions and sizes for the deck you are constructing and the capacity it will be holding as well as the weight. Always use hardwood deck materials to avoid sagging that can occur from using the wrong size of deck lumber.

  1. Don’t skimp on weather protection

Make sure that you used Premier decking deck materials from Lowe’s to construct your new wood deck. Premier decking timber is warranted and is made to protect your deck from the weather. Also, make sure to seal and stain your deck yearly after inspecting it for any needed repairs. By doing so, you will have much longevity in the life of your wood deck.

  1. Avoid setting decking posts in concrete

One would think that setting your wood posts in concrete would give you a solid foundation for many years to come. Do not be fooled by this way of thinking. One of the largest mistakes to avoid is placing your wood posts in concrete. Concrete is porous and allows moisture into the wood causing wood rot and instability. Make sure to use timber posts stirrups to avoid this costly mistake.

  1. Use hardwood rather than softwood planks

The last thing you want to have happen after you have constructed your beautiful deck is to have splitting of your deck flooring. Splitting occurs if you used the wrong type of deck lumber. Softwood planks are much cheaper than hardwood planks, but there is a reason for that. By using more inexpensive deck materials, you are compromising the integrity of your newly built deck and splitting as well as instability can occur.

  1. Avoid stains

One way to prevent stains on your new deck flooring is to avoid metal on your wood deck. Using a metal grinder or leaving metal anywhere on your Premier decking will cause black stains on your new deck flooring. The black stain is due to the metal becoming wet and reacting to the tannin in your wood planks.

  1. Have termite inspections done yearly

Having a termite inspection done annually is an important event to complete. Termites are insects that love wet, rotting wood and as they ingest it, your deck literally disappears. It becomes rotten in certain spots and causes damage that is very costly to repair. To avoid this mistake, make sure you have a deck inspection for termites done at least yearly!

  1. Verify the steel bolts and screws are galvanized

Any easy mistake to make that can end up causing you a headache and lots of money down the road is not using galvanized steel bolts, nails, and screws to fasten your wood deck together. Galvanized steel is coated with a layer of zinc that protects the fasteners from rusting. Without galvanized steel accessories, when the deck becomes moist, rusting will occur and weaken the integrity of the entire deck and deck materials.

As you can see, building a deck has to be done carefully, and it is critical to avoid mistakes. If you follow our advice on the top seven decking mistakes you should always avoid, your new deck will be constructed well for many years to come.